Hyundai Santa Fe Blue Hybrid Concept, 2008

Hyundai Santa Fe Blue Hybrid Concept, 2008



 
 


The vehicle maintains the overall design and dynamics of the standard Hyundai Santa Fe, but is altogether a different car under the hood. Hyundai engineers developed a proprietary parallel hybrid drive system which mates the powerful but thrifty 2.4-litre Theta engine to a six-speed automatic transmission and a 30Kw electric motor for maximum fuel economy and substantially reduced CO2 emissions. And it also can be used as a generator in order to save regenerative electric energy to the battery. This proprietary parallel hybrid drive architecture will serve as the foundation for all future hybrid drive vehicles to be developed by Hyundai.

Hybrid Technology
The petrol-electric hybrid technology featured in the Hyundai Santa Fe Blue Hybrid reduces CO2 emissions to just 148 g/km (combined cycle) and delivers a fuel consumption figure of 6.2l/100km (combined cycle). With an estimated top speed of 170 km/h and a 0-100km/h acceleration time of 10.6 sec.
To maximize fuel economy, all of the Theta's major driveline and cooling system components have been optimized to reduce friction, while the crankcase has been filled with low friction oil engine control software automatically shuts off the engine when the vehicle comes to a halt, cutting emissions to zero. When pressure is reapplied to the accelerator pedal, the Integrated Starter Generator (ISG) automatically restarts the engine. The Theta's engine control software governing injection pressure, engine cycle timing and exhaust retreatment rates has been revised to further reduce fuel consumption.
In addition, the latest electric motor-assisted steering system reduces power drain, and very low resistance tyres further optimize fuel economy.

Electric propulsion for the Hyundai Santa Fe Blue Hybrid is provided by a 30kW electric motor (205Nm) which is coupled directly to the six-speed automatic tranmssion. The top three gear ratios have been extended to ensure lower engine revolutions per minute (RPM) and further enhance fuel economy. Electrical power is stored in a 270V Lithium Polymer rechargeable battery (5.3Ah/270V) which has significant advantages over lithium-ion batteries, including higher energy density and lower manufacturing costs. Li-Poly is also more resistant to physical damage and can also take more charge-discharge cycles before storage capacity begins to degrade.

To be sold initially in the Korean domestic market under the Avante badge, the Elantra LPI Hybrid will be the world's first electric hybrid vehicle to be powered by liquid petroleum gas (LPG) and the first to adopt advanced Li-Poly batteries.
Hyundai's developed its very first hybrid electric vehicle in 1995 when it unveiled the Future Green Vehicle at the Seoul Motor Show. In 1999 it displayed an Elantra Hybrid Electric Vehicle (HEV) at the Seoul Motor Show and, in 2000, an Accent HEV - both of which featured 'hard-type' parallel electric drive systems and Integrated Starter Generator technology. However, these research development vehicles did not go into mass production.
In 2004, the company moved its HEV program into low-volume test production, delivering 50 examples of a gas-electric hybrid Hyundai Getz (B-segment vehicles badged as Hyundai Click in the Korean domestic market) to Korean government agencies as part of a fleet demonstration project. These were 'mild-type' hybrid systems using 12kW motors and nickel metal hydride batteries. The hybrid technology development program continued to expand and, in 2005, Hyundai and its affiliate Kia Motors Corp. delivered 350 more units to the demonstration fleet, 730 more units in 2006 and 1,682 more units in 2007, including Accent HEVs.

Innovative Panoramic Roof
The Hyundai Santa Fe Blue Hybrid features an innovative three-piece panorama sunroof. The moveable glass top has UV filtration which reduces thermal loading without restricting light transparency. And to protect cabin occupants against solar radiation, an adjustable shade can be operated separately from the glass top. The modular system solution was developed Magna Car Top System.

Post Title

→

Hyundai Santa Fe Blue Hybrid Concept, 2008

Post URL

→

https://car-perfomance.blogspot.com/2011/03/hyundai-santa-fe-blue-hybrid-concept.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Hyundai HED-5 i-Mode Concept, 2008

Hyundai HED-5 i-Mode Concept, 2008



 
 
 The Hyundai introduce a new concept car which hints at a future MPV production model and showcases advanced technologies. The Hyundai HED-5, named "i-Mode" is a six-seater people carrier that incorporates high-tech materials, an advanced seating concept and state of the art communication technology in a completely new vehicle.
By working together with the partners Bayer MaterialScience AG, Keiper and LG Electronics, Hyundai is continuing a cross-industry co-operation to drive new technologies faster to market. The co-operation with Bayer MaterialScience enabled the radical design of the Hyundai HED-5 to be implemented more quickly. The materials used are lighter and more adaptable than the metal and glass they replace.
In combination with a light weight body construction, reduces fuel consumption and CO2 emissions. Self-healing water based bodywork finishes from Bayer add to the environmentally friendly concept of the vehicle and even let minor scratches magically disappear by themselves. The i-Mode is the first vehicle to feature the new "BayVision" glazing system and Collimator headlight lenses made from Makrolon®.
Through the advanced entertainment concept developed by LG electronics, the vehicle becomes an extension of the digital home, allowing passengers to stay connected, communicate and interact in the car. Access to the web, video games, movies or video calling are all possible through the pop-down touch-screen displays and webcams, located within the overhead console. A wireless network enables a selection of cable-free keyboards, game controllers and headphones to further personalise the entertainment experience. The advanced developments seen on the i-Mode give a dynamic indication of real possibilities for the near future.
Hyundai's engineering partner Keiper supported the i-Mode project with the exclusive world premiere of its new and unique Swivel Seat concept. The first row passenger seat rotates to face second and third row occupants. When the seat is turned, the backrest converts into a comfortable seat surface. This is made possible by a fully concealed, power-operated kinematic system. The integrated seatbelt system - another technically advanced debut - and the adjustable headrest maximize passive safety for passengers in either sitting position. The second row bench slides rearwards to increase comfort and create a social area.

The Hyundai HED-5 i-Mode concept demonstrates the increasing awareness Hyundai has towards environmental issues. Cooperation with Bayer Material Science has seen use of the innovative glazing alternative 'Makrolon', enabling the car to have extended transparent areas, reducing weight and increasing fuel economy.
The Hyundai HED-5 "i mode" includes the hexagonal shaped grill, which symbolises the new brand identity for Europe. This feature, previously showcased on earlier Hyundai concept cars, demonstrates the consistency in developing a coherent design language. It is through such characteristics that Hyundai aim to enhance the perceived quality and recognition of their products.
Through the door opening mechanism, the interior is in the form of a lounge compartment. The interior represents the concept of social space, an environment where all occupants can enjoy safe travel in comfort, surrounded by sophisticated technology and luxurious materials.
The seats, which offer first class comfort for all occupants, combining a modern look with innovative functionality. The Cognac leather cushions and the burgundy lacquered seat structure give the occupants a lounge atmosphere without the limitations of a conventional automotive interior layout.
The light beige headliner, which continues through into the pillars, provides the interior with a floodlit, almost roofless panoramic appearance. The horizontal trim colour division, between dark and light tones further emphasises this.

All-new R Diesel with Two-Stage Turbocharging
i-Mode is powered by an all-new 2.2-litre R diesel engine which first passes the intake air through a low-pressure turbocharger from where it is forced into a high-pressure turbocharger for maximum boost: 158kw (215ps) and 47kg.m of peak torque (461 Nm). The R Engine has a power density in excess of 70kw per litre putting Hyundai diesel technology in the same class as any leading German automaker. When its low-end torque of 30kg.m is compared with the 19kg.m of low-end torque delivered by the standard R Engine, one quickly appreciates the value of dual-stage turbo charging.
The R Engine is a smooth-shifting 6-speed automatic gearbox. Even at maximum loads, the engine does not incur fuel consumption penalties thanks to its high capacity for exhaust gas recirculation that also benefits efforts to reduce NOx emissions. The R Engine is assured of meeting future, more stringent EU exhaust emission standards.

Post Title

→

Hyundai HED-5 i-Mode Concept, 2008

Post URL

→

https://car-perfomance.blogspot.com/2011/03/hyundai-hed-5-i-mode-concept-2008.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Infiniti G37 Sedan, 2010

Infiniti G37 Sedan, 2010



 
 


A more dynamic look and revised interior, with state-of-the-art infotainment technology available, take the Infiniti G37 Sedan into a new decade with more presence and quality than ever. The 2010 version of Infiniti's lead-in sports model for Europe remains just as potent, poised and well equipped as before, but benefits from enhancements that bring it into line with other Infiniti models as well as responding to feedback from Infiniti owners.

The changes are subtle but effective - as one glance at the sharper new front-end styling reveals. More sculptural, more distinctive and more indicative of the 320 PS (316 bhp) under the bonnet of every Infiniti G37, the new look moves the Sedan visually closer to its sportier two-door cousin, the Infiniti G37 Coupé.

New front light clusters - still with bi-Xenon adaptive cornering headlights as standard - and a fresh-looking iteration of the familiar double-arch Infiniti grille are the main component changes, proving the rightness of the original design. A redesigned under-bumper section with recessed, wide-set foglights (previously the fogs were set into the main light clusters) gives the 2010 G37 Sedan a more purposeful edge to its already striking visual impact.
The rest of the Infiniti G37 Sedan's body is untouched. Which is good news for fans of its trademark long bonnet, raked-back A pillars and athletic stance that projects power and grace in equal measure.

Changes in the cabin are just as subtle but equally tailored to meeting owners' expectations. For instance, the Rosewood interior accents are now high gloss, the leather hues slightly lighter and there's the option of a new a new Wheat leather colour combined with a black dashboard and upper door trims. Reinforcing the Infiniti G37's impression of quality is a new aluminium trim design, reminiscent of Japanese calligraphy, along with a redesigned centre console based on that in the EX and FX crossovers. Improving both legibility and design cohesiveness, the gauges and LCD instrument display now use white as background colour.

For the first time, Infiniti's much-praised information and entertainment platform, Connectiviti, is available in the Sedan following on from its debut in the Infiniti G37 Convertible earlier in 2009.

Notable for its all-embracing functionality and user-friendliness, the HDD (hard disk drive) based system connects all manner of modern technology, from MP3 players to mobile phones, with seamless efficiency. Connectiviti+ takes things a stage further with a 30GB Music Box and innovative satellite navigation system which, among its long list of functions, can even access built-in Michelin's Red and Green Guides to take you to the door of a top restaurant or hotel.

Post Title

→

Infiniti G37 Sedan, 2010

Post URL

→

https://car-perfomance.blogspot.com/2011/03/infiniti-g37-sedan-2010.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Alfa Romeo 159 1750 TBi, 2010

Alfa Romeo 159 1750 TBi, 2010



 
 


The new 159 is designed to express a sporting yet seductive personality and boasts road holding and performance that set new standards for this class of car. Two new engines in particular (a 200 HP, 1750 cc turbocharged petrol engine and a 170 HP 2.0 JTDM diesel) place the Alfa Romeo 159, in the power range that accounts for over half of Alfa Romeo sales.

Under their fascinating and highly personal exterior, all Alfa Romeos offer a choice of superb engines, all packed with the latest technology and bursting with performance. Alfa Romeo engines are the perfect embodiment of the sporting soul that has always set the marque apart from the competition. The Alfa Romeo 159 is certainly no exception.

The new 1750 cc turbo petrol engine (manufactured by FPT - Fiat Powertrain Technologies) comes combined with a six speed manual gearbox and boasts advanced ignition control solutions including direct fuel injection, two continuously variable valve timing units, a turbocharger and a revolutionary scavenging control system. The resulting performance is comparable to - or better than - that of many 3 litre engines while still delivering fuel consumption typical of a compact four cylinder unit.

The force behind the development of any Alfa Romeo engine is the company's determination to use technology to enhance driving pleasure. This certainly applies to the development of the new, Euro 5, "1750 Turbo Benzina 200 CV" unit destined immediately for the Alfa Romeo 159 and later on for the Alfa Romeo Brera, Spider and 159 Sportwagon.

The engine takes the Alfa Romeo 159, with its refined Italian styling and typical sporting elegance to an impressive top speed of 235 kph and accelerates it from 0 to 100 kph in just 7.7 seconds. The 200 HP Alfa Romeo 159 1750 TBi is therefore a true representative of Alfa's exclusive motoring lifestyle. Far from being a mere 'means of transport', the new 159 is a real driver's car. It delivers genuine sports performance and muscular acceleration thanks to generous torque and smooth response even at low revs and the extended power band of a modern, advanced petrol engine that minimises the need for you to 'work' the gearbox. The engine sound too is inspiring without ever becoming tiresome.

Post Title

→

Alfa Romeo 159 1750 TBi, 2010

Post URL

→

https://car-perfomance.blogspot.com/2011/03/alfa-romeo-159-1750-tbi-2010.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Rover 75 Coupe Concept, 2004

Rover 75 Coupe Concept, 2004



 


The company's design team wanted to mark the first 100 years of the Rover marque with a stylish design that would sit confidently as the latest in the line of renowned Rovers like the P4, the handsome P5 coupe, the innovative P6 2000 model and the bold SD1 hatchback.

This has been achieved in the form of the Rover 75 Coupe concept - a beautiful and elegant two-door expression of the stylish 75 Saloon. The concept's interior strongly focuses on Yew wood and Tan leather hide introducing the style of designer furniture into the automotive lounge, extending Rover's trademark for a welcoming interior.

Peter Stevens, Rover's design director says: "I want people to turn away for a moment from post modern brutalism and to enjoy the elegant and timeless lines of the Rover 75 Coupe Concept design. The true character of a Rover comes from its ability to present a cosseting environment with comfort and refinement being the high priorities, elements that should be expressed in the form and detailing of the exterior of the car.

Post Title

→

Rover 75 Coupe Concept, 2004

Post URL

→

https://car-perfomance.blogspot.com/2011/03/rover-75-coupe-concept-2004.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Buick Riviera Concept Coupe, 2007

Buick Riviera Concept Coupe, 2007



 
 
 


The Riviera has been engineered to accommodate a new hybrid system.
The fuel-efficient car, which will feature several technological and manufacturing advances.

Exterior Design - A Sense Of Existence, Not Anonymity
The Riviera design is structured around the Buick tri-shield logo, sitting proudly on a trihedral waterfall grille. This takes the traditional Buick treatment to a new level of sophisticated boldness.

The gullwing doors, selected for their exotic appeal, achieve an expansive entrance to the two-plus-two seating configuration. Measuring 1938 millimeters at their widest point, they add to the coupe's sleek sideline. At night, fully opened doors gently shine the "Buick" name on the ground.

The use of carbon fiber in all body panels allowed the designers greater flexibility through reduced mass and added strength. This made the gullwing engineering demands easier to realize and sharp, tight radius curves possible across the body surface.

The Riviera sits on 21-inch 10-spoke forged aluminum wheels, combining polished and satin finishes, with low-profile tires. Taking their cue from Formula One cars, the side mirrors are sweeping yet unobtrusive.

Interior Design : All About Relaxation
In a word - sanctuary. The use of rich blue and subtle creams, representing earth and water themes, are conveyed through high-quality leather bucket seats, plush carpet and a luxurious padded steering wheel. Completing the organic feel, the roof comprises two shaded glass windows offering increased headroom and a celestial connection for occupants.

The interior has no discernable start and finish point for the front and sides, creating a comfortable lounge feel. It is immediately futuristic yet somehow familiar.
The three-dimensional speedometer, inspired by past classics but utterly modern in design, compliments the touchpad styled central console loosely modeled on a computer mouse. An LCD display screen crowns the central console.

Interior designers were encouraged to consider people's personal belongings to enhance their feeling of familiarity and comfort in the vehicle. Continuing the theme of calm simplicity, electronic shifter pads replace the traditional transmission shifter. Controls are kept to a minimum to avoid driver distraction.
Ambient light strips are applied from across the console and inserted on the door liner, stretching to the front seats. Deliberately imitating precious Chinese jade stone, the lights are tinted a subtle icy green, which also offers tribute to a favored color of Buicks in days gone by.

Interior trim treatments befitting the Buick prestige abound - miniature aluminum tri-shields in the front seat headrests, a wooden floor mat in the rear and a rear central armrest which can move sideways left and right to accommodate passengers of different sizes.

Post Title

→

Buick Riviera Concept Coupe, 2007

Post URL

→

https://car-perfomance.blogspot.com/2011/03/buick-riviera-concept-coupe-2007.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Pontiac G6, 2009

Pontiac G6, 2009




 
Pontiac has announced that it is ringing in the new year with a fresh look for its best-selling line of G6 mid-size vehicles. Additional fuel-saving powertrain options, more aggressive exterior styling, and a sleek new instrument panel highlight the 2009.5 model Pontiac G6, which will begin arriving in the dealerships in January 2009.
All Pontiac G6 models, including sedans, coupes and convertibles, receive the interior upgrades. The uniquely styled Pontiac G6 GXP models will not be affected by the exterior or powertrain changes.

New Powertrain Options
For the first time, the Pontiac G6 coupe will be available with GM's fuel sipping, 164-horsepower 2.4L four-cylinder Ecotec engine. Linked to a six-speed automatic transmission, the coupe's new powertrain combo is capable of the same 33 miles per gallon fuel efficiency as the current Pontiac G6 sedan and also incorporates a new TAPshift manual shift system with steering wheel-mounted paddle controls.
In those areas where E85 ethanol-based fuel is readily available, a FlexFuel version of the 219-horsepower 3.5L V6 will be available as a no-cost alternative to the standard 3.5L engine on all body styles.

The optional 222-horsepower 3.9L V6 for the Pontiac G6 convertible remains unchanged, as does the standard 252-horsepower 3.6L V6 in all GXP models.

Sportier Exterior
Inspired by the sporty front end styling of the new Pontiac G8 performance sedan, the new G6 front fascia features chrome surrounds for the signature Pontiac dual port honeycomb grille. This same grille pattern is carried to an updated lower air dam.

Also new are a revised headlight design with clear park/turn lenses and amber lamps, body color mirrors and painted rockers on the sedan and coupe. An updated spoiler is available for base model sedans and is standard on the GT models.
New rear fascias unique to the sedan and coupe/convertible accommodate both single and dual exhaust, as well as larger diameter exhaust tips.
17-inch chrome wheel covers are now standard equipped on all four-cylinder, six-speed automatic sedans and coupes. An updated 17-inch wheel will be standard as a part of the popular Sun-and-Sound package.

Refreshed Interior
A revised center stack is the most obvious interior enhancement of the 2009.5 model Pontiac G6, sporting all new HVAC controls and an updated AM/FM/CD/MP3 radio with auxiliary audio input jack. The driver information center has moved to the gauge cluster, which has also been enhanced with new graphics and lighting.

The 2009.5 Pontiac G6 will also benefit from the integrated info-tainment opportunities in GM's optional MY LINK enhanced communication package. MY LINK integrates audio system, Bluetooth telephone, XM satellite radio and OnStar navigation functions in one simple package. It includes an upgraded USB-equipped radio system, allowing for direct control of various portable music players, plus provides a full year of both XM radio and OnStar Directions and Connections services.

Other interior changes include new dark satin nickel trim accents on the steering wheel, door panels, and shifter plate. New two-tone seats in an ebony-light taupe color combination are available in either cloth or leather for all models, offering an option to the standard ebony seats. A new optional ebony-titanium color leather seating package is also available on all GT and GXP models.

Post Title

→

Pontiac G6, 2009

Post URL

→

https://car-perfomance.blogspot.com/2011/03/pontiac-g6-2009.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Porsche Cayenne Turbo S, 2009

Porsche Cayenne Turbo S, 2009



 
The renowned Porsche crest, the Porsche Cayenne Turbo S is the most powerful Cayenne ever built. Sharing the same essential 4.8-liter V8 engine as the Cayenne S, GTS and Turbo, the Turbo S boasts 550 horsepower and 553 lb.-ft. of torque. That's a ten percent increase in power and a seven percent boost in torque over the Cayenne Turbo. The Porsche Cayenne Turbo S accelerates from zero to 60 mph (96 km/h) in 4.7 seconds on its way to a track-proven top speed of 174 mph (280 km/h). Like the Cayenne S and Cayenne Turbo, the Turbo S comes standard with a six-speed Tiptronic S driver-shiftable automatic transmission.

Given Porsche's sensitivity to environmental concerns, despite the astounding performance capabilities of the Porsche Cayenne Turbo S, the new model carries no fuel economy penalty over the Cayenne Turbo. Both the 2009 Porsche Cayenne Turbo and Porsche Cayenne Turbo S are rated by the EPA to deliver 12 mpg in the city and 19 mpg on the highway. And both are certified as Low- Emissions Vehicles, Tier II (LEV-II).

Instantly recognizable as a Cayenne, and clearly identifiable as a unique model, the Turbo S rides on standard 21 inch alloy wheels carrying humongous 295/35 wide-aspect tires. Other unique visual clues to the flagship's identity are the body-color wheel arch extensions and matte-finish air intake grilles. When seen from the rear, the Porsche Cayenne Turbo S is instantly recognizable by its dual-twin tailpipes made of precision cast aluminum, inspired by those on the Porsche Carrera GT. Finally, for those who want, the Porsche Cayenne Turbo S is offered in a unique exterior color: Lava Grey Metallic.

The passenger cabin of the Porsche Cayenne Turbo S boasts a unique look thanks to its standard two-color leather upholstery. Buyers have a choice of either Black/Havanna or Black/Steel Grey seating surfaces, as well as solid Black or Sand Beige. In addition, the dashboard and upper door panels have coordinating seams finished in the lighter upholstery color. The interior of the Turbo S is also distinct with its standard two-tone, padded leather steering wheel and carbon fiber door and dash trim. As with the Cayenne GTS, the Porsche Cayenne Turbo S boasts bolstered front and rear sport seats. The front seats have an extended memory feature and the three-person rear seat features contours for the outer positions.

Besides its more potent turbocharged engine, the Porsche Cayenne Turbo S differs mechanically from the Turbo by coming with Porsche Dynamic Chassis Control (PDCC) as standard equipment. PDCC features active control of body lean in curves for improved response, agility and increased passenger comfort.

Post Title

→

Porsche Cayenne Turbo S, 2009

Post URL

→

https://car-perfomance.blogspot.com/2011/03/porsche-cayenne-turbo-s-2009.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Peugeot 308 CC, 2009

Peugeot 308 CC, 2009






 
 



The attractive design
The Peugeot 308 CC stands out by the superb fluidity of its style, both in its coupé and cabriolet configurations. From the badge to the end of the roof, from the door to the lower rear panel, the graphic style of its profile is emphasised by light reflecting contours. Chrome detailing further enhances this elegant profile.

Low slung and firmly planted on its wheels, the Peugeot 308 CC has a prominent shape and spectacular LED rear lights that use "red light curtain" technology to create a unique signature for the car by day and by night.
The passenger compartment has an undeniable personality. Particularly striking in the "cabriolet" version, it has a different feel from the hatchback and creates the impression of a grand touring car.

The door panels also have an exclusive design, incorporating an elegant yet dynamic and robust metallic inner door handle. The sporty steering wheel, the special finish of the instrument panel and the "black lacquer" centre console complete this theme.

In terms of the "sporty" "haute couture" feel of the car, the Peugeot 308 CC is clothed with dynamic fabrics, simple leather or even an "integral leather" trim. This now extends to the entire passenger compartment which is usually unseen in this segment. In Black, Vintage or Beige, the attractive interior trims differ according to the range of body colours: Fashionable pearlescent black, subtle "terre d'ombre" and also the established favourites: blue, red, black and grey are available.

The typical CC specification
Meticulously designed to enhance the day-to-day comfort and convenience of its occupants, the Peugeot 308 CC offers a multitude of "everyday" benefits.
The fully automatic retractable roof can be magically transformed in 20 seconds and the operation can be viewed on the colour display, turning the car into a dynamic coupé or an elegant cabriolet according to the mood of its occupants.

A coupé-cabriolet with four full size seats, the Peugeot 308 CC benefits from wider tracks and a wider body compared to the 307 CC, as well as a front seat structure which offers both generous leg room to the rear occupants and provides a good amount of space.

Two dynamic and flexible engines power the Peugeot 308 CC through a six speed manual gearbox. unless an automatic gearbox is preferred. They are the 1.6 litre THP 110 kW (150 bhp) turbocharged direct injection petrol engine and the 2.0 litre HDi FAP Euro 5 103 kW (140 bhp) diesel engine, the latter being also particularly environmentally-friendly.

The car combines both motoring enjoyment with efficient road holding. The wide tracks, the lowered ride height and high-performance suspension specially developed for this body style give the Peugeot 308 CC excellent potential, together with a real sense of security for the driver. The large 302 x 26 mm disc brakes are an equal match to the performance of the engines. This is combined with an ESP system that watches over the occupants at all times.

Inside the Peugeot 308 CC an excellent structural rigidity wards off any vibrations that might affect steering, rear vision or seat comfort. This is the result of carefully placed structural reinforcements: dampers that pacify, braces ready to take the strain.. In short, the Peugeot 308 CC offers a highly rigid structure and excellent vibration damping demonstrating Peugeot's coupé-cabriolet expertise.

An indispensable ingredient of comfort and convenience inside the car, the low interior noise levels of the Peugeot 308 CC in its coupé configuration will clearly set the vehicle apart from its competitors.

The Peugeot 308 CC is designed to create a real sensation of tranquillity in the passenger compartment. The structure is robust and designed to withstand and dissipate front and side impact energy. It is also supplemented by innovative and intelligent means of restraint that the cabriolet body shape dictates. They include a chest/pelvis side air bag built into the front seats and exclusively a side head air bag which is a world first, guaranteeing effective protection of all parts of the body regardless of seat position.
The aim of all this important safety work is to obtain 5 stars in the EuroNcap test for the protection of adult occupants of the vehicle.

In harmony with the seasons. The cabriolet configuration can even be enjoyed in cold weather, whether it's making the most of early spring, saying no to winter or driving with the roof down in beautiful snow bound landscapes. Peugeot offers all these pleasures to the occupants of the Peugeot 308 CC, thanks to its protective architecture, its intelligent air conditioning (which adapts its operation to the cabriolet body shape), heated seats, its windstop and. its remarkable "Airwave" system built into the front seats, which acts like a scarf by diffusing warm air adjustable for temperature/flow and direction.

Following are further typical CC features and equipment testifying to the ability of the Peugeot 308 CC to anticipate its occupants' needs.

    * Automatic remote-control locking of interior storage compartments (glove box and storage under the central armrest)
    * Centralised control of all four windows.
    * The special "rear seat access" function with electrically-operated seats.
    * Deadlocking of doors and selective unlocking.
    * LED courtesy lighting in the door mirrors.

Not forgetting a usable boot with dedicated storage spaces (including one under the boot carpet for the windstop), laid out to resemble a presentation box. Its capacity (VDA method) is 403 dm3 in the coupé configuration and 226 dm3 under the windstop in the cabriolet configuration (or 465 litres and 266 litres respectively in "water" equivalent).

Finally, to make the journey even more pleasant a wide range of WIP (World In Peugeot) options are available on the Peugeot 308 CC:
    * WIP sound, MP3 CD audio system
    * WIP Bluetooth, MP3 CD audio system, USB Box and hands-free kit.
    * WIP Nav, a user-friendly satellite navigation system offering a MP3 CD audio system, Bluetooth functionality and satellite navigation with a retractable 7" 16/9 colour display.
    * WIP Com 3D, a top-of-the-range satellite navigation system with a 30 GB hard disc and a Juke Box function, MP3 CD audio system, integral mobile phone, Bluetooth functionality, USB connector and a retractable, high-resolution 7" 16/9 colour screen with a 3D display.
    * The JBL Hi-fi pack with 10 speakers offering made-to-measure sound which recognises and adapts to the cabriolet configuration.

Post Title

→

Peugeot 308 CC, 2009

Post URL

→

https://car-perfomance.blogspot.com/2011/03/peugeot-308-cc-2009.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection

Dodge Viper SRT10, 2008

Dodge Viper SRT10, 2008




 
 
 
 The new 2008 Dodge Viper SRT10 boasts more of what performance aficionados crave: kick-in-the-pants, throw-back-in-the-seat power, combined with benchmark braking, world-class ride and handling, a race-inspired interior and bold exterior styling.


Standout Powertrain
When SRT powertrain engineers set out to get more venom from the 2008 Dodge Viper SRT10's powerplant, their objectives included not only increasing performance, but also complying with stringent regulatory requirements, such as federal Tier 2, Bin 5 and California's Low Emissions Vehicle (LEV) 2 mandates.
Working with specialists from McLaren Performance Technologies and Ricardo, Inc., SRT engineers began by following the racer's basic formula for more power: bigger displacement, more efficient breathing and higher engine speed.

The new Dodge Viper SRT10's deep-skirted V-10 aluminum engine block was revised for a 1-millimeter larger bore, raising the displacement to 8.4 liters from 8.3 liters. With strengthened bulkheads and improved water jackets for better cooling, the block includes pressed-in iron cylinder liners and cross-bolted main bearing caps for strength and durability.

The Viper SRT10's 8.4-liter engine breathes through new cylinder heads equipped with Computer Numerically Controlled (CNC)-shaped combustion chambers, larger valves and Variable Valve Timing (VVT). VVT electronically adjusts when the exhaust valves are open and closed according to engine speed and load, allowing the engine to "breathe" cleaner and more efficiently.

The 2008 Dodge Viper SRT10 V-10's two-piece intake manifold combines a cast aluminum lower with smooth runners for better air flow, bolted to a die-cast aluminum upper plenum. A revised air-cleaner box with a low-restriction filter sends air through a dual electronic throttle control into the intake module.

The air-fuel mixture in the cylinders is ignited by platinum-tip spark plugs fired by new individual plug coils mounted on the cylinder-head covers.

Within the cylinders, pistons are equipped with larger-diameter floating pins with bronze bushings for high-load capability. Forged powder-metal connecting rods are secured with aircraft-quality fasteners for increased fatigue strength.

Engine lubrication is managed by a larger oil pump and a swinging oil pickup adapted from Viper competition engines, to improve oil pressure in high-rpm and hard-cornering conditions.

Spent gases exit through tubular air-gap headers, which not only improve exhaust flow, but also ensure quick catalyst light-off for improved emission control. The headers' stamped stainless-steel outer shell acts as a thermal heat shield for the individual stainless-steel runners that contribute to better flow separation and exhaust tuning.

SRT engineers didn't stop there. Upgrades were developed to handle the 8.4-liter V-10's increased horsepower and torque levels, while improving traction, driveability - and durability.

The 2008 Dodge Viper SRT10's V-10 channels its power through a new, smaller-diameter, twin-disc clutch (a change from the previous larger-diameter, single-disc setup). The new clutch reduces rotating inertia by 18 percent, resulting in reduced clutch-pedal effort and improved engagement feel.

The transmission is the latest evolution of the Tremec T56 six-speed manual, known as the TR6060. It features 10 percent wider gears for higher torque capacity and a new synchronizer package. A new shifter system results in reduced shifter travel. Club racers will applaud a new provision for adding an external transmission cooler.

Benchmark Braking
Stopping power is another key attribute of the Dodge Viper SRT10 formula, with 14-inch brake rotors gripped by Brembo 44/40 dual opposing piston calipers in the front and Brembo 42/38 dual opposing calipers in the rear. An anti-lock braking system (ABS) prevents lockup during hard braking. This system results in a benchmark braking performance of 60-to-0 mph in less than 100 feet.

World-class Ride and Handling
The ride and handling of the 2008 Dodge Viper SRT10 is defined by a race-bred, fully independent, four-wheel suspension featuring lightweight, high-performance aluminum control arms and knuckles, damped by lightweight coil-over shock absorbers.
Where the power goes right to the road, SRT engineers retained the tried-and-true Dana M44-4 rear axle and outfitted it with a new GKN Visco-Lok speed-sensing limited-slip differential for improved traction.

Bold Exterior Styling
The 2008 Dodge Viper SRT10 remains available in two body styles - Roadster and Coupe. Both feature a dramatic new hood with a larger, more efficient hood scoop for air induction and larger, functional hood louvers to facilitate a greater cooling effect for the more powerful 8.4-liter, 600-horsepower V-10 engine underneath.

Eight exterior colors will be introduced throughout the model year - five of which are all-new including Venom Red, Snakeskin Green, Viper Violet, Viper Orange and Bright Blue. Racing stripes continue to be an option with six dual painted stripe colors available: white, black, silver, graphite, blue and red.

The Dodge Viper SRT10 Coupe's hard top with its "double bubble" styling makes it even more torsionally stiff than the Roadster. The 2008 Dodge Viper SRT10 Coupe offers increased downforce and high-speed stability with its sloping roofline and deck-lid spoiler. Plus, the Dodge Viper SRT10 Coupe has an additional 6.25 cubic feet of trunk space than the Viper SRT10 Roadster, for a total of 14.65 cubic feet. The roof and headliner structure offer more room to accommodate a safety cage, while maintaining as much headroom as possible.

Race-inspired Interior Design
The 2008 Dodge Viper SRT10 Roadster and Coupe cockpit retains its characteristic red push-button starter and performance-oriented, highly functional instrument panel with center-mounted tachometer and 220-mph speedometer.
Five interior colors will be available in 2008: black, and four new color combinations in black/red, black/blue, black/slate or black/natural tan. A choice of bezel finishes on the center instrument panel and console adds to the increased level of customization.

Post Title

→

Dodge Viper SRT10, 2008

Post URL

→

https://car-perfomance.blogspot.com/2011/03/dodge-viper-srt10-2008.html

Visit Car Perfomance for Daily Updated Wedding Dresses Collection